It is a long time since I have not seen that Breitling unveiled such an attractive watch. It looks like Breitling spent all their luck in the past, those best-selling models like Navitimer 01, Avenger Blackbird, Super Avenger Titanium, etc, they were all published several years ago, and the new models released in recent years do not have too much selling points. However, in this morning when I walked in the street of Zhanxi Road, which has the biggest replica watch market in the world, I found this amazing Breitling watch, its black and orange color combination attracts me deeply, here I brought the watch home and wrote this review.
The Breitling Chronomat B01 Raven replica watch is made by G factory, we call it GF. Now the collection of replica Breitling watches from GF becomes bigger, you can find a quality replica of any Breitling watch from GF, this is a lucky new for our watch fans. Like Noob makes the best Rolex, now GF is the only factory that has the most complete collection of Breitling watches.
The replica has a black case, the case is made of solid 316L stainless steel, while the surface has a thick layer of high quality black DLC coating. The case has a large size, its diameter is up to 44.5mm, while is measured to be 17.5mm in thickness. The whole case is brushed, like the watch, the case is 1:1 replicated according to genuine watch, especially its bezel, which is uni-directional rotating and has four pawls being fixed. The pawl at 12 o’clock has a big pearl inside, the pearl looks big and has a strong lume. By the way, the bezel markings are widely engraved, they are in bright orange color, which is in line with the orange tachymetre inner bezel on the dial.
The dial is black, like genuine watch, three subdials are working, and the position of each subdial is correct. Besides the small seconds subdial at 9 o’clock, the other two subdials are for minute and hour chronograph display. Three small hands and the long seconds-chronograph hand are in eye-catching orange color. I must say that the biggest highlight on the watch lies in the orange color usage.
The following are more detailed specification of the replica watch:
Movement: Asia Valjoux 7750 Chronograph
Case: 44.5mm*17.5mm, DLC Coated on Solid 316L Stainless Steel
Bezel: Uni-Directional Rotating, Lumed Pearl, Orange Markings
Crystal: Sapphire with AR Coating
Dial: Black with Stick Hour Markers, Which Have Lume Coating on The End
Bracelet: Black Rubber Strap with DLC Coated Deployant Clasp
Water Resistant: 50m
Rolex only published several pieces Daytona watches for women, but every Daytona watch they unveiled is very suitable for women to wear, I do not think Rolex Daytona is exclusive for men. Under current trend, the Daytona, whose case diameter is up to 40mm, looks neutral and is a nice choice for women. Daytona is the only model of Rolex that has a chronograph function. It is only in 40mm and does not have other options, except some vintage models like Paul Newman Daytona. Among all Rolex models, the popularity of Daytona is close to Submariner.
Due to its high popularity, Daytona is also highly welcomed in replica watch industry, it is replicated by a lot of watch manufacturers. Different factories make different quality of Daytona replica watches. The general rule is small factories make low quality Daytona replicas, while big factories make high quality ones. However, I do not recommend you to buy the most expensive replicas, you need to find the right one. Sometimes the watch is not very stable even you spent more than $600 USD on it, from a big factory such as Noob, ARF, etc. But sometimes a replica watch from a common watch factory can serve you for years. This situation always happens, some clients also complained that their expensive watches have issues only after several months. I must say this situation is common, you just need to find a right watch supplier who could do a careful quality control before shipping your order.
Now, back to this Noob watch, yes, when talking about Noob factory, does thie factory have an online website? Some people will ask. No, this factory does not open sites online. The Daytona replica shown here is the newest V2 edition from Noob factory. Compared with V1, this version has a much slimmer movement. First, the watch is made of better material 904L stainless steel, whether the lugs and clasp, there are correct engravings. There are same correct engravings on the back side of the case back and movement plates. The movement plates have Rolex SEALs, the entire movement is decorated to the lookf of genuine Rolex 4130.
The dial is blue, it has special sunray patterns, the texture is high quality. I do not know how did the factory do, but it really looks high quality. All hour markers have been filled with quality Swiss lume material, they will have a strong lume light in the dark conditions.
The replica is equipped with a super clone 4130 movement. It is the best quality chronograph movement in replica watch market. Compared with the movement installed in ARF Daytona, this super clone 4130 movement can achieve a full chronograph function. By the way, the replica watch comes with one pair of free short rubber strap. The following are details of the replica.
Movement: Super Clone 4130, Decorated Movement Plates and Auto Rotor to Look of Rolex Calibre 4130
Case: 40mm*12.5mm, Solid 904L Stainless Steel
Bezel: Black Ceramic
Crystal: Sapphire with Tiny Rolex Crown Logo at 6 o’clock
Dial: Blue with Working Subdials, Blue Superlume on Markers and Hands
Bracelet: Top Quality Black Rubber with Deployant Clasp
Water Resistant: 30m
For all Hublot Big Bang, I only suggest you buy from V6 factory. Do you know the full name of V6 factory, it is HBB V6, yes, this factory got this name because of making the best Hublot replica watches before, although their focus is on the PAMs, they still make the best replicas of Hublot Big Bang. So, the first Big Bang Hublot watch I recommend is a rose gold one from V6. In the past several years, this one is the Hublot watch I mostly sold to my clients. The case is plated with 18K rose gold, the bezel uses real black ceramic and dial, which is one of the big selling points, has a carbon-fiber look. Three small dials all work the same way as genuine. The inside meachnism is based on an Asia Valjoux 7750, the movement plate is engraved with “HUB4100” and then filled with black. By the way, this Hublot watch is sold at a very reasonable price.
2. JJ Classic Fusion Grey
Classic Fusion is very popular since the appearance of JJ factory, because this factory has brought us a lot of high quality Hublot Classic Fusion replica watches that are beyond our expectation. The first difficulty which JJ factory has solved on this replica is its thin case, which has achieved to be 9.5mm, it is hard to achieve such a level. Back to this watch, it is 42mm in case diameter, the middle case is made of solid 316L stainless steel, while bezel and case back are made of Titanium. Among the 42mm Classic Fusion collection of JJ factory, the two most popular models are this grey and the black one. I recommend you this grey model, because the grey dial is more in line with its silver stainless steel case. Inside movement is an Asia ETA 2892, very stable.
3. V6 Big Bang Full Ceramic
Also from V6 factory. The biggest selling point of this replica lies in its ceramic case and bezel. The inside clone movement is decorated to the look of genuine HUB4100. The dial is black with stainless steel hour markers, central big red second-chronograph hand is very eye-catching. Actually another place on the watch I love very much is its black rubber strap, which is very in line with the black ceramic case, is made of Malaysian natural rubber material and has a strong toughness. The quality of this V6 Hublot Big Bang is guaranteed.
4. Big Bang Full Carbon Fiber
This watch is made by 3A factory. Its all black outlook looks very cool. Carbon fiber case and bezel are matt finished, the carbon fiber patterns look real, just like the genuine watch. I think this is also the main reason why this watch ranks on the fourth position in this list. Black dial also uses real carbon fiber material, the dial has multi layers and three subdials have sunkened design, which increases the three-dimensional visual effect of the whole watch. Inside the case, there is a clone HUB4100 movement that is based on an Asia Valjoux 7750 chronograph movement.
5. Big Bang Steel Ceramic
One of the best replica Hublot watches made with stainless steel and ceramic. Stainless steel case is brushed, so is the black ceramic bezel. The case is measured to be 44.5mm in diameter and 16mm thick. Black dial is carbon fiber patterned with stainless steel markers and hands, which are filled with white luminescence in the center. The dial lume is enhanced, so the green lume light in the dark will be very strong and long-lasting.
What about these five Hublot watches in this list? Do you also have any idea about the best replica Hublot watches?
Happy New Year ! Now, in 2019, do you plan to buy one replica watch? What is your budget for replica watches in 2019? In the new year, all watch factories will continue to improve their flagship models and publish new watches, and the prices of these replica watches will become higher and higher, not only because they are made of better materials, but also closer to genuine models in finish and movement. Which watch do you most want to buy in 2019? The Rolex Submariner 116610LN from Noob, a PAM from KW factory or an IWC Pilot watch from ZF? Or you can make your purchase decision after the SIHH 2019 and Basel 2019, there will be a lot of new models published in that two exhibitions, and our watch factories will certainly replicate them once they are released to the public. Today, the first post I want to publish in 2019 is about one Omega Planet Ocean replica watch, which was made by VS factory, the replica watch has a high quality like other Omega Seamaster watches manufactured by VS factory, for example, the hot Omega Spectre 007, Seamaster Diver 300m Grey, etc. The genuine watch is 600m waterproof, while the replica is tested by VS to be 50m water resistant.
This Omega Planet Ocean watch looks a little big due to its large 43.5mm case diameter, the case is 16mm thick, the whole watch is made of solid 316L stainless steel, so you will feel a little heavy when holding the watch on hand, but this heavy weight gives me a real feeling, I like this feel. The lugs of Omega Planet Ocean have an unique shape, which look more three-dimensional. On the left case, there is a Helium Valve button positioned at 10 o’clock, this button is not working. The crown has a satin-finished face with a polished Ω logo. The bezel is made of black ceramic with silver markers, during 1 to 15 on the bezel, there is orange rubber. Case back is see-through crystal on the center, where you can appreciate the inner mechanism closely.
Like genuine watch, the replica features a black dial that is made of ZrO2. Orange Arabic numerals 6, 9 and 12 are very eye-catching, other silver hour markers are big and fully filled with luminescence in the center. The Ω logo under “12” and word “OMEGA” are in silver like other hour markers, they are three-dimensional. The central second hand has an orange tip, but it looks very close to red color, whatever, greatly different from the orange color on dial and bezel. The dial can show two different lume light in the dark, you can see green and blue lume color at night.
The replica has a very special band, it is made two different materials. On the outside, you can see it is weave-style nylon material, which is in black, stitching on the band is in orange color, the edge of the band uses orange rubber. Check the back side of the band, it is black rubber. The two materials used on the straps greatly ensure the wearing comfort, but also maintain the cool look of the band.
At last, please check the specification of the replica watch.
Movement: Super Clone 8900, Based on Asia ETA 2836 Automatic, Decorated Movement Plates and Auto Rotor, Black Balance Wheel, Real Rosy Red Jewels Like Omega Cal. 8900
Case: 43.5mm*16mm, Solid 316L Stainless Steel, Brushed. Polished Edge on Case Lugs. Correct Finish on Helium Valve Button and Crown
Bezel: Black Ceramic with Silver Markers, Orange Rubber Between 0 and 15.
Crystal: Sapphire with Swiss Grade AR Coating
Dial: Black with Superlume Hour Markers and Hands, Date Window at 3:00, Orange 3-6-9 Hour Markers
Bracelet: Black Nylon Material on Outside, Black Rubber Material on Back Side, Orange Hand Stitching
Water Resistant: 50m
I do not know if Hublot still maintains a cooperation with Formula 1, but this Hublot King Power F1 replica watch is really amazing, it is the best I have ever seen. Too many Hublot watches I have seen in recent days, they all have similar color and dial layout, I have been tired, so I walked in the street to look something fresh, and this big guy attracted me. My watch supplier did not tell me this watch before, the store owner I met in this morning told me that V6 just published this replica Hublot watch, I was simply attracted by its eye-catching red color on the dial. You know, V6 factory’s full name is HBB V6, at the beginning of its foundation, this factory is famous for making good quality replica Hublot Big Bang watches, this King Power F1 replica perfectly inherits the high quality features of HBB V6, which still makes the best Big Bang. Actually Hublot is a popular sports Swiss watch brand that has a big amount of need all over the world, but among their Big Bang collection, I seldom saw the King Power F1 model, now the appearance of this F1 watch, I think a lot of racing lovers will buy this watch.
The case looks a little bigger than common 44mm Big Bang, this King Power F1 is 48mm in case diameter, it is also very thick, which has been up to 17.5mm. So, you will feel heavy when wearing the watch on wrist. However, it is the right watch for some tough guys who love large-size watches, for example, Sylvester Stallone loves Panerai. Now we back to this King Power F1, its case is fully made of solid 316L stainless steel, which is brushed, both case and bezel have screws to fix. The bezel is made of black ceramic and has six silver screws. Black ceramic bezel also has a lot of holes, I know it imitates the part design on F1 racing car. On the right side of the case, there are two buttons for you to operate chronograph function. The round button at 2:00 has a black “START” word in red background, while the RESET button has red word in black background. Like you see, the case has used three different materials at least, they are stainless steel, ceramic and rubber.
The dial is very classic. Like genuine watch, the replica has a black dial but uses F1’s iconice red color on the dial. Black perfectly matches red, it is one classic group of colors. Not only in layered, the usage of red color is the biggest highlight of the whole dial. I know the dial gets its design inspiration from the dashboard of F1 car. Three subdials work the same way as genuine. Small seconds hand runs on subdial at 9 o’clock, the bigger subdial at 3 o’clock is 30-minute chronograph counter, while the all-black small dial at 6 o’clock is displaying 12-hour chronograph. All hands are not in white stainless steel, but in Tungsten steel color. The long second-chronograph hand in the center has a striking red tip, I like the dial design, maybe this will become my most favorite sports watch, I have gotten one from V6.
The movement is an Asia clone HUB4100, which is modified on basis of Shanghai Chronograph movement. The black skeletonized auto rotor has white words “KING POWER” being engraved, the top movement plate is engraved with Hublot logo and “HUB4100”. Whatever, the movement has a very close look to genuine Hublot HUB4100, its stability is also very high.
Like the dial, the band of the replica watch is also a big highlight. It uses black nylon material on outside, while the back side that will touch your skin is black rubber, which feels very soft. The outside nylon is in black with red hand stitching, it looks very cool. The buckle has correct engravings that are filled with black.
The watch is the best Hublot F1 replica that has been published in recent years, you will need such a cool watch when driving a sports car with your friends, are you going to be a fan of F1 now?
Now it is nearly the end of 2018, I think it is time to make a summary of this year. I know what you are really care about when buying a replica watch, you guys all want your replica to look closest to the genuine, so, today, I will publish an article about the top ten best-selling replica watches in 2018, they are also the best replica watches made in our market. This article will also be an ultimate guide for you to find the replica watch that looks closest to genuine. Let’s begin.
1 – Noob V9 Edition Rolex Submariner 116610LN
Rolex is the best-selling watch around the world, it is also the truth in replica watch field. Noob factory published V9 edition in 2018, which means this is the ninth time Noob has made improvement on this Submariner watch. Now V9 Submariner 1166710LN is made of genuine 904L stainless steel in case and bracelet, the bezel engravings are closer to genuine in color and thickness, V9 Submariner 116610LN has two movement options, Asia ETA 2836 and Super Clone 3135. V9 Rolex Submariner 116610LN from Noob ranks first in this top ten list.
2 – JF V4 Edition Royal Oak 15400
Audemars Piguet is a famous sports watch brand from Switzerland. Royal Oak is their iconic series and is well-known among watch fans due to its octagon-shaped bezel. Audemars Piguet Royal Oak 15400 is the second best seller, it is the V4 edition from JF. 15400 not only has a top quality case finish, but it is also equipped with a super clone 3120 movement that looks closest to genuine AP Cal. 3120. The JF V4 Royal Oak 15400 has three dial color options, black, white and blue.
3 – JF V9.5 Edition ROO Diver 15703
Royal Oak Offshore Diver 15703 ranks third. It is also made by JF, the newest V9.5 edition published in 2018. The watch is equipped with an Asia ETA 2824 automatic movement and one pair of rubber straps. JF makes the best AP replicas, you do not need to worry about the quality, it is superior and much higher than AP made by other factories.
4 – Noob V8 Edition GMT-Master II 116710BLNR Black/Blue
GMT-Master II 116710BLNR is always a hot watch. Now the replica has come to be V8 edition, made by Noob factory. Black and blue ceramic bezel makes it stand out among other Rolex GMT-Master II models. Now V8 uses an Asia ETA 2836 movement, which is very accurate and stable. GMT function also works the same way as genuine. In 2019, I think Noob will make an important improvement on it, they will use 904L stainless steel material on this watch at least. Let’s expect.
5 – ARF V2 Edition Sea-Dweller 126600 Single Red
Sea-Dewller Single Red 126600 was published by Rolex in 2017 Basel, so it is a new face in our market. It was called “Single Red” because the SEW-DWELLER printing is in red on the black dial. There are several factories manufacturing the replicas of this Rolex Sea-Dweller 126600, BP, AR, GM and Noob. Among them, AR makes the best replica Single Red 126600, Noob also makes it, but it does not use 904L stainless steel like AR factory. BP version has the price advantage but it only makes mid-quality Rolex replicas. While GM is a new watch manufacturer, it does not have too much replicating experience. So, if you want a 126600 replica, just choose from ARF. Besides, this is the V2 edition they published, every detail has been upgraded.
6 – Noob V6 Edition Planet Ocean 42mm Liquidmetal
Noob made this replica several years ago, it was very hot once being published. But the watch often does not have stocks, you need to wait for a long time after placing your order. Now the newest edtion comes to V6. It has several things improved. The dial now uses ceramic material, liquidmetal bezel like original, date font is corrected to be the same as genuine. The case back has high quality engravings now. The replica Planet Ocean now is equipped with an Asia ETA 2892, like the mostly used ETA 2824, this movement also has a high stability.
7 – Noob Daytona 116500
What watch will come in the seventh? Yes, it is another Rolex watch, the Daytona 116500. A lot of factories has made this watch, but Noob makes the best one. Among so many replicas, I will choose this one from Noob, not only because this factory has the richest experience in imitating Rolex, but they use the newest 904L stainless steel on this replica 116500. Three subdials all work, the chronograph is fully functional. I do not recommend you buy this Daytona watch from ARF, because their hour-chronograph hand and minute-chronograph hand are fixed, means the chronograph is not real. In the beginning of 2019, an important step ARF will make is on the chronograph function of their Super Clone Daytona Collection.
8 – ZF Aquanaut 5167
The next three watches are all made by ZF. You think Patek Philippe Nautilus should rank at this position, but I do not agree. The replica PP Aquanaut 5167 made by ZF looks closer to genuine than Nautolus. This watch has several options in dial and strap color. This is a replica with a see-through case back, but ZF has used a Miyota 9015 as a based movement, to decorate the auto rotor and plates, so it has a very close outlook to genuine PP Cal. 324.
9 – ZF Tudor Black Bay Red Bezel
ZF is the overlord in imitating Tudor Black Bay watches. This factory makes the best replica Tudor Black Bay. This one with a metal red bezel is the hottest replica among all Black Bay models. The following is its specification.
Movement: Asia ETA 2824-2 Automatic, 25 Jewels, 28800BPH
Case: 41mm*11mm, Solid 316L Stainless Steel
Bezel: Red Metal Bezel, Uni-directional Rotating Diving Bezel
Crystal: Sapphire, Dome-shaped, with Colorless Double AR Coating
Dial: Black Dial with Superlumed Hour Markers and Hands, Markers and Hands Have Golden Edge
Bracelet: Made of 316L Stainless Steel, Rivet Style
Water Resistant: 50m
10 – ZF Portuguese 7 Days
This watch sells very well, a lot of clients from Australia and Singapore bought this watch from me. ZF made the best IWC Portuguese 7 Days Power Reserve replica watch, first, the power reserve indicator is working, second, the power reserve has reached to be 3 days, although not 7 days like real, but the watch can work for you at least 3 days after being fully wound. It is a perfect dress watch for a lot of men who need to wear for a formal occasion. Portuguese 7 Days Power Reserve has a lot of models, the dial has blue, white and black color options, the case has white stainless steel, yellow gold and rose gold, while the leather band also has several choices in color. The following photos are showing popular model IW500710. It is the latest replica from ZF, with a super clone 52010 movement.
This is my own top ten replica watches in 2018, every one has different opinion, you must also have a different top ten list, if so, please share your top ten watches with us in comment section. Actually, except those watches above, there are a lot of other replica watches that are in high quality and sold well, we can not list all of them here. Now, it is nearly the beginning of 2019, we hope that manufacturers will bring us more amazing replica watches in the coming new year. Thanks for reading my review.
Bvlgari is a famous jewelry brand, while their watches are not remembered by a lot of people. However, the Serpenti watch is an iconic series of Bvlgari that was specially designed for women, the watch is more considered as a jewelry accessory than a timer. When some body talks about Bvlgari watch, I can only remember Serpenti. Since the beginning of 2017, Bvlgari has unveiled two important models that has caught our attention, the Diagono Magnesium and Octo. The first Bvlgari watch adopts several innovative materials that were never used before, while the Octo is the one we are going to introduce today. Bvlgari Octo is newly released in 2018 and famous for its polygonal case design. The photos shown here describe a replica Bvlgari Octo, which is made by JL factory, I do not know this factory, it seems to be a new manufacturer in low popularity.
The case is made of solid 316L stainless steel and measured to be 41mm in diameter, the case is polygon-shaped, each side has several cutting faces that were processed by CNC. Skilled watch masters of JL factory spent a lot of time on case polishing. The whole case is a result of Italian aesthetics. Case back is octagon-shaped and fixed by rose gold screws, on the center, there is a see-through sapphire crystal that displays engine in front of your eyes.
Dial is black and has rose gold bar-shaped hour markers with two beveled edge, except the arabic numeral markers of 6 and 12. The replica dial could be done 100% the same as genuine because it is so simple, it has a high readability, the white minutes scales on black background, white date font, they all add scores to the dial readability. Like case, hour and minute hands also have several cutting faces that create a three-dimensional visual effect.
The replica is equipped with a Miyota 9015 movement that is directly imported from Japan. This movement has the same stability as genuine Swiss ETA. It was modified by JL factory, both appearance and size are the same as genuine Bvlgari BVL193. The movement has a superior polishing on plates and auto rotor that is very close to genuine, while correct engravings are the same as original watch.
The Bvlgari Octo replica is fitted with wide black rubber strap, while JL factory also offers one pair of black leather band for free. Now buy any watch reviewed on our store, free DHL shipping is provided.
Bell Ross is a famous military watch brand but it does not sell well, especially in replica watch field, every person wants to get the best Rolex or Panerai replica, and they have forgotten Bell Ross. I think the main reason why people do not choose Bell Ross is because of its square case, most guys like round case of their watches, the next is tonneau-shaped case. In their opinion, square case will have waterproofing problem. While I do not think so, if you have a replica watch, whatever it is a Rolex or Panerai, I suggest you take it off before swimming even the factory claimed they are 30m waterproof, it is a replica and costed you several hundred dollars, you do not want your money wasted if the water leaked into your watch by accident. So, if you really love Bell Ross watch and want to buy a replica, do not need to worry its waterproofness, you can take good care of it and the watch can last for several years.
I introduced a Bell Ross BR03-92 Diver replica watch before, it is a black one, now this replica is in blue. Compared with the black, I like this blue Bell Ross more. In this summer, wearing such a watch on the beach will catch a lot of attention. Another reason why I love this Bell Ross is that the factory will send one pair of black nylon strap for free.
The whole watch looks like a professional instrument, its case is in size of 42mm*42mm, there are four big screws to fix the case and back, case frontal face is brushed while the square edge is polished. Look at four corners of the case, they are polished so round and smooth. Crown has engravings beside to tell you how to lock, it is wrapped by blue rubber and there is a big Bell Ross logo on front face. Blue bezel features white diving engravings, the pearl is filled with white luminescence and looks full. Case back is sold 316L stainless steel and features watch series engravings, it is not just a single steel back, once you open it, you can find the construction is amazing, just the same as genuine.
The dial is blue, all markers and printings are white except yellow “300M/1000FT”. Hour markers are very big and filled white luminous material, they will emit blue light in the dark, while the hour hand has yellow luminous material applied and will emit green light. A small round date window is positioned at 4:30, date font is in white and has the same thickness as genuine watch. In front of the dial, the sapphire has light AR coating, so whether during the day or at night, the replica watch will have a good readability. The dial completes the whole watch and makes it look like a diving instrument for professional divers.
At last, I want to share the specification of the replica watch with you guys.
Movement: Genuine Japanese Miyota 9015 Automatic, Very Stable and Accurate
Case: 42mm*42mm, Solid 316L Stainless Steel with Removable Lugs
Bezel: Blue Metallic Bezel
Crystal: Sapphire with AR Coating
Dial: Blue with Luminous Hour Markers and Hands
Bracelet: Blue with Tang Buckle, Free Black Nylon Strap
Water Resistant: 50m
I seldom reviewed Bell & Ross watches on my blog, two days ago, I was back from my home town and went to the watch market, I found an amazing replica Bell & Ross watch, it is exactly the watch I like because of its diving style. The watch not only has all features which you can find on diving watches, but is full of mechanical feeling. BR03-92 Diver Type is the first diving watch of Bell & Ross in square shape. On reason I like this watch because diver’s watch is always one of my favorite, the other is it has two types of band shipped along with the replica, black rubber and nylon strap. Two different types of band in black color, this is very cool. Both rubber band and nylon strap are suitable to be worn for diving.
The case of the Bell & Ross Diver replica is made of 316L stainless steel, case size is measured to be 42mm*42mm, it is 11mm thick, solid stainless steel case ensures the watch to be able to withstand harsh exploring conditions underwater, protect the complicated mechanical structure and function. The case is also reinforced by solid and strong case back to ensure an extremely high pressure underwater. Like genuine Bell & Ross BR 03-92 Diver, this replica also features a soft iron inside the case to improve its anti-magnetic performance. On case back, there are engravings telling you the watch series, case material, movement type and water resistant depth.
Another factor that provides this watch with a superior water resistance is its sapphire crystal, which is measured to be 2.85mm thick, this is amazing. The surface of the sapphire crystal is applied with anti-reflective coating.
Black dial and white hour markers form a high contrast, so that the wearer could read time easily. Like genuine watch, the replica Bell & Ross watch is also applied with Superluminova on hour markers, minute hand and second hand. The hour hand is different, it is in orange color. Besides, the minute hand is also for you to know diving time that could be read from the bezel. At 4:30, there is a small round window, yes it is for date display. The layout of various elements on the dial is full of layered feeling, very reasonable.
Last, like we mentioned above, the replica watch comes with black rubber band and nylon strap, as well as one pair of screw drivers for you to change the band.
Movement: Genuine Japan Miyota 9015 Automatic
Case: 42mm*42mm*11mm, 316L Stainless Steel, 1:1 Case Profile
Crystal: Sapphire with AR Coating
Dial: Black with Lumed Hour Markers and Hands
Band: Black Rubber Strap(Free Nylon Strap)
Water Resistant: 50m
Text-to-speech function is limited to 200 characters
I really like the diving style watch with such a strong and tough appearance. Big watch has always been my favorite, especially the diver’s watch. So Panerai and Rolex are my two most favored Swiss brands. However, when I chose watches for my clients in our market, I saw this Oris watch, it attracted me deeply, the big-size case and stricking orange color on dial. It is just a perfect timepiece for people who are diving fans. Like most other brands, this Oris watch features a rotating bezel and black rubber strap, but the biggest difference between it and others lies in its dial, there is a week display on the centre. The watch is a limited edition from Oris, named Aquis Great Barrier Reef, I do not know the source of its name, I am considering to buy one for my personal wearing, the rubber band will make the watch fit my wrist perfectly.
First, the watch is produced by AN factory, case is measured to be 45mm in diameter, 16mm in thickness. The case is made of 316L stainless steel, brushed. While the metal part that connects rubber band to case is polished. Uni-directional rotating bezel has an orange triangle at 12 o’clock, all diving markers on bezel are white. On the centre of the case back, there is a map of Australia, other engravings tell you the name of this Oris watch. Screw-down case back and the gasket on the groove guarantee a good water resistance of this watch.
The dial is black, silver hour markers feature white luminescence like hour and minute hands. Orange second hand is eye-catching, while the orange minute markers are very convenient for you to read the time in dark place. On the centre of the dial, there is a disc below the dial showing current day from SUN to MON. The date window in square positioned at 6 o’clock has a dark brown date font. In a word, the dial is very easy for you to read the time. It is great for the diver to tell current time under water.
Some people have already asked me whether it could be equipped with a Swiss ETA movement when I posted this watch review on my blog, I must say yes, this Oris Aquis Great Barrier Reef replica could be equipped with a Swiss ETA 2836-2 movement, but the price will be $108 usd higher. By the way, the Day Wheel could be adjusted through crown just like adjusting the time.