Tag: IWC

IWC

APS Factory Replica IWC Portuguese Chrono with Super Clone 69355 Movement

Post author By Karren
Post date January 23, 2026
No Comments on APS Factory Replica IWC Portuguese Chrono with Super Clone 69355 Movement

Last time, I introduced one IWC Pilot’s chrono watch made by APS Factory, it is the first replica of IWC Pilot’s chrono watch with a super clone movement in the market, it is equipped with a super clone 69385 movement. Please check that review at https://www.wristwatchspot.com/2025/10/10/aps-factory-replica-iwc-pilots-watch-chronograph-iw378006-green/. At that time, I thought next time APS will make improvement on the movement of Portuguese Chrono watches, because both the Pilot’s chrono and Portuguese chrono have some similarity in function and dial layout, which is the small dial at 6 o’clock is for display of small seconds. Just in this week, APS finally released three Portuguese chrono models with the new movement, currently white dial, green dial and champagne dial available.

The following one has a white dial and golden markers, this watch was published by several watch factories before, the most popular versions are coming from ZF and AZ. Many customers have always been complaining the stability of the movement, which is an Asian 7750, they think it is not too stable, so this is the main reason why APS made the upgrade on the movement this time. In my opinion, I do not think it is necessary to make this improvement, after all, this watch is not hot among IWC fans, and there was already an upgrade made in the past, whose movement was changed from SH7750 to DD7750 and the stability was greatly improved. Now on this new clone 69355 movement which APS factory brings to us, I also suggest you do not use its chronograph function too often.

This clone 69355 is good, but it is not a perfect clone movement. Check the engravings on the movement plates and auto rotor, they are very shallow, not like they are engraved, more like being printed. The letterings are also much thinner than those on the genuine IWC Calibre. It seems like APS always has this issue when they publish a new movement, the 925 movement they publish for the Jaeger LeCoultre Master Ultra Thin also has this issue.

By the way, this IWC Portuguese chrono replica watch is equipped with a black leather band that is made with calfskin leather, whose surface has embossed aligator prints. Compared with the genuine aligator leather band, it looks more glossy, while the luster of an alligator leather strap is more natural. Absolutely you can get a genuine aligator leather band and replace on, it is not expensive.

Replica IWC Portuguese Chrono Gold Markers

Replica IWC Portuguese Chrono Blue Hands

Tags 69355, APS Factory, IWC, Portuguese

IWC

APS Factory Replica IWC Pilot’s Watch Chronograph IW378006 Green

Post author By Karren
Post date October 10, 2025
No Comments on APS Factory Replica IWC Pilot’s Watch Chronograph IW378006 Green

Just heard that Clean Factory has been back to the business. On many sites, it is called Clean Plus now. Many people may be curious about if this is the same Clean Factory as before, one thing I am very sure of is that the new factory Clean Plus is not operated by the same team now, which means this factory is now under the control of another person, who perhaps is the relative of the former boss. However, one thing we care about is the quality of the Rolex watches offered by Clean Plus, if the quality is still the same as that offered by Clean before? Anyone who has already bought the watch from Clean Plus? In my opinion, the quality will most likely be the same, because it is not difficult to find the suppliers that offered watch parts for Clean Factory before. So, we hope Clean Plus can still offer high quality Rolex replicas, but they will be more low-key in future.

For the new IWC Pilot’s chronograph watch, APS has made three models that have different dial colors, there are black, blue and green choices, each of them has stainless steel bracelet and leather band option. I think many of you guys have seen the replicas of these IWC watches, but they were made by other factories and do not have right functions. This replica made by APS Factory is the only one with correct function that is the same as the genuine. Compared with the black and blue, I like this green more. Many people may say black does not have color difference, but I have checked all three, the blue and green also do not have color difference.

The case is made with solid 316L stainless steel, I measured it, which has a 41mm diameter, not including the crown, and it has a 14.5mm thickness. Finally the replica has a correct case thickness for a genuine watch with chronograph movement. Observe the sapphire crystal at a certain angle, there is a blue hue on the crystal. The green dial has a sunburst finish that looks as good as that on the genuine watch. Central hour hand and minute hand as well as three small hands have polished edge like the genuine. The red small second hand is running smoothly on the subdial at 6 o’clock.

The watch comes with a stainless steel bracelet, but a leather strap is also available, and it is easy to be replaced on because of its quick-release system. Check the movement through the crystal back, we can see beautiful fish-scale patterns on the base plate, and correct engravings on top plates and auto rotor, in outlook and function, the movement is exactly 1:1 clone of the genuine IWC Calibre.

Tags APS Factory, IW378006, IWC, Pilot's Watch

IWC

V7 Factory Replica IWC Ingenieur IW328908 Green Brad Pitt

Post author By Karren
Post date June 6, 2025
No Comments on V7 Factory Replica IWC Ingenieur IW328908 Green Brad Pitt

What is V7? It is a watch manufacturer in this industry. It makes a lot of high quality replica watches, the most famous is the Portofino and Pilot watches from IWC. However, this watch manufacturer is not as popular as other makers such as Clean, VS and PPF, perhaps because IWC is also not too popular among these Swiss brands such as Rolex, Panerai and Patek Philippe. But the Ingenieur replicas from V7 will boost the factory’s visibility, since 2025, V7 has published several replicas of the new Ingenieur watches, including black, white and blue, today, I will introduce another Ingenieur replica watch from them, it is an amazing green color.

Genuine watch has a reference IW328908, which is a special edition designed for Brad Pitt, in the film F1, he acts Sonny Hayes wears this watch, this green is his iconic color.

V7 makes this replica IWC Ingenieur watch very good, especially its green dial, which is made to be exactly the same as genuine watch, the dial is avocado green but slightly brighter, with the golden tone on the markers and hands, it is a very good color combination on the dial, and a very comfortable color for the summer. I like this green Ingenieur, it will be more popular than other colors V7 has published.

Another factory named GH also makes Ingenieur replicas, but the quality is not as good as V7. On this IW328908, V7 really focuses on the finish of details, for example, the brushing on the bezel and case side is really good, the screws on the bezel are not just straight on the corner, each screw has round polishing finish on the corner, this is the same as genuine. On the bracelet, the middle links are polished, the links on both sides are brushed.

On basis of the previous Ingenieur models, V7 makes improvements on the green dial of this new Ingenieur. The texture of the dial looks closer to genuine, when you swing the watch on hand, the patterns on the dial have a distinct metallic finish like the genuine watch.

At last, the replica is equipped with a Chinese automatic movement, which is developed according to the Swiss ETA 2892. This movement has a 38-hour to 40-hour power reserve, while the genuine watch has a power reserve of about 120 hours. V7 offers a Swiss SW 300 movement option, but the price will be much higher.

Tags 2892, Brad Pitt, Ingenieur, IW328908, IWC, Sea-gull, SW 300, V7 Factory

Omega

Two new arrivals

Since 2025, VS Factory has been very active in this industry, they have published a lot of new models that cover Panerai, Rolex and Omega. Today, I am going to introduce another Omega Seamaster new model they just published. Is this Seamaster Diver 300m another 007 James Bond model? It looks nice and comes with a mesh stainless steel bracelet. Every time when VS published a 007 model, it will become a best seller, like the Seamaster Spectre and Seamaster No Time to Die, the Seamaster Spectre is the start and No Time to Die has continued the trend. Just in last week, VS announced that they will install a new super clone 8800 movement in the Seamaster No Time to Die, I think this will push the sales of this replica watch to another peak. Because in a short time, VS has made two big improvements on the replica No Time to Die, last time, they updated the mesh bracelet to titanium material. Different from the Seamaster No Time to Die, this new Seamaster coming from VS is fully made with stainless steel, there is an extra black rubber band coming with the watch. The replica watch has a correct lume that looks very beautiful.

Replica Omega Seamaster Diver 300m Steel Watch

The second new watch is also made by VS Factory, it is another Seamaster Diver 300m in rose gold. Rose gold case, bezel and buckle. The replica is equipped with a clone 8801, I think you can wait for this watch until VS super clone 8800 movement comes out, I think they will develop a super clone 8801 and install it in this replica watch. At that time, two versions of this replica Seamaster may exist in the market, one is with a clone 8801 that is modified on basis of Sea-gull 2824, the other is with a super clone 8801 but sold at a much higher price. I think every one who loves real super clone will choose the latter.

Replica Omega Seamaster 300 Rose Gold Ceramic

Tags 8801, BLS Factory, IWC, No Time to Die, Pilot, Rose Gold, Seamaster, VS Factory

IWC

Super Clone ZF V5 Portuguese 7 Days Power Reserve

Post author By Karren
Post date February 14, 2025
2 Comments on Super Clone ZF V5 Portuguese 7 Days Power Reserve

This watch has been in our market for years, and it is still very hot. APS Factory just published the new Portuguese 7 Days models several months ago, but not many people are interested in, some of these new Portuguese replicas have color difference, so I still suggest you buy the old Portuguese 7 Days from Z Factory, the latest version has come to V5. APS, which is the brother of Z Factory, also made these old Portuguese 7 Days watches, but they are selling these watches under another name called “AZ”, compared with the V5 version from Z Factory, the one made by AZ is also good, but not as good as the one made by Z Factory. The movement used in the ZF Portuguese is actually developed by APS Factory, so I am very curious that why APS did not make a better one than ZF, the biggest reason is that the ZF Portuguese has been highly recognized in this industry, whatever APS will do is not helpful. So, that’s the reason why APS is so urgent to produce the new Portuguese, but they did not make them good.

Back to the V5 Portuguese 7 Days from ZF, they have several color options, the most popular one is the stainless steel one with white dial and blue leather strap. The leather band looks like black, but it is indeed blue.

The dial has beautiful flame hands and hour markers, that is a major reason why people love this one in white dial. The one made by AZ, the color of the hand is not that accurate. The tip end of the second hand is slightly arched because need to fit the domed sapphire crystal. The date window set at 6 o’clock has a laddered design. The small dial at 3 o’clock is displaying the remaining power of the movement, once being fully wound, the small hand will point at number “7”. However, the replica watch does not have 7-day power reserve, it can continuously work about 3 to 4 days after giving a full winding. By the way, the watch has a case diameter of 42mm, the thickness is about 14.6mm if measuring from the top domed part. Measuring from the edge of the crystal, it is 13.4mm in thickness.

The band is calfskin leather, you can also request a genuine aligator leather band but its price will be much higher. The genuine aligator leather band can be customized in our market, and it indeed feels more comfortable.

Replica IWC Portuguese 7 Days with Aligator Leather Strap

Tags APS Factory, AZ Factory, IWC, Portuguese 7 Days, V5, Z Factory

IWC

APS Factory Replica IWC Portuguese 7 Days IW501704 Blue with Stainless Steel Bracelet

Post author By Karren
Post date January 7, 2025
No Comments on APS Factory Replica IWC Portuguese 7 Days IW501704 Blue with Stainless Steel Bracelet

APS Factory published several replica IWC Portuguese 7 Days watches with leather strap last time, however, some of them have color difference with the genuine watch, I do not think they are perfect. Why Z Factory still has not published the new Portuguese 7 Days Power Reserve models? They have stopped producing important new replicas for some time, the latest new ones from them are some Tudor watches. The brotherhood between them and APS has terminated? Because in the past, Z Factory always published new models in head of APS, then APS would release the same models.

Back to the new Portugese 7 Days Power Reserve replica watch we are going to review, it is made by APS Factory, I like the blue one, I think it should be the best replica IWC watch made in 2024. This blue Portugese 7 Days Power Reserve has no color difference, case and dial have a very good finish, the stainless steel bracelet is made with a high cost, its clasp has the same construction as that of genuine watch. The movement in the replica is the one used in old replica Portuguese 7 Days Power Reserve made by Z Factory, it is a very stable movement from Dandong.

The case is measured to be 42.4mm in diameter and 13.2mm in thickness. I like its dial very much, people who like Portuguese 7 Days can buy this replica from APS, the blue color is correct, from different angles, you can see sunray finish, two small dials has refined circles like genuine watch, all hour markers, central hour hand and minute hand have bright polishing finish. The sapphire crystal is special, on the round edge, it looks slightly arched.

On the stainless steel bracelet, the links on both sides are brushed, which are in contrast with the polishing finish on the middle links. The bracelet has a very perfect clasp, with all necessary features like genuine watch. I took several pictures. And in future I will take a video to show you how to use the clasp.

Replica IWC Portuguese 7 Days IW501704 Blue

Replica IWC Portuguese 7 Days IW501704 Blue Dial

IWC Portuguese 7 Days IW501704 Small Dials

IWC Portuguese 7 Days IW501704 Case Diameter

IWC Portuguese 7 Days IW501704 Case Thickness

IWC Portuguese 7 Days IW501704 Engraving

IWC Portuguese 7 Days IW501704 Extension

Tags APS Factory, IWC, Portuguese, Power Reserve

IWC

New arrival IWC Ingenieur replica watches from V7 factory

Post author By Karren
Post date February 17, 2024
1 Comment on New arrival IWC Ingenieur replica watches from V7 factory

Today, let us take a look at the three new models just published by V7 factory. V7 is a watch maker that produces top quality IWC replica watches in our market, they have the biggest market share of IWC replicas and no competitors threatens them. This time, the IWC Ingenieur replica watches they published at the end of 2023 currently have three colors to choose, black, white and blue.

I still remember that there is a factory named GH made these Ingenieur replica watches before, but many people do not recognize their quality, for example, the stainless steel bezel on the GH Ingenieur looks wider than that on the genuine watch. GH factory also produced the green color for the new Ingenieur, but V7 currently does not make the green one, perhaps they will produce it after our new year holiday, the blue version looks strange, some people said it also looks like green.

IWC may have a great expectation on the new Ingenieur, because they want to make a stainless steel watch that could achieve a success like Royal Oak of AP, Overseas of VC and Nautilus of Patek, these watches have two common features, sporty case design and full stainless steel made. The new Ingenieur looks much more elegant than AP Royal Oak, not that rugged. Genuine watch is sold at a high price because it has a a high anti-magnetic performance, the replica does not have.

The high popularity of some specific replica watch can also drive the crazy sale of its genuine watch. Is this really true? I heard somebody said this in the video review. Will the Ingenieur from V7 become a hot model and drive the sales of the genuine watch?

The entire watch is brushed, except on the blue model, whose middle links on the bracelet are polished. The direction of brushing on the bezel is different from that on the case and bracelet, which gives the wearer a contract look, there are four rivet studs on the bezel that add some retro flavor to the watch, the dial uses unique grids that are not easy for V7 to immitate, there are always differences for such dial if you compare the replica with genuine watch closely, even on the dial of replica AP 15400 made by ZF or APS.

The finish on the bracelet is impressive, but the stainless steel bracelet feels a bit stiff, not that soft on genuine watch, the super clone Nautilus 5711 from 3K and PPF has the same issue. Behind the solid case back, there is a Sea-gull 2892 movement inside, it is said that V7 will also offer SW300 movement for the Ingenieur in future.

Tags 2892, Ingenieur, IWC, V7 Factory

IWC

GH Factory Replica IWC Ingenieur Watch with Miyota 9015 Movement

Post author By Karren
Post date November 11, 2023
No Comments on GH Factory Replica IWC Ingenieur Watch with Miyota 9015 Movement

Genuine IWC Ingenieur has an expensive price for its antimagnetic feature, like the Rolex Milgauss, not many people buy this watch from IWC, more people would love to choose their Portuguese or diving watch Aquatimer. For ordinary people, the antimagnetic feature for a watch may be useless, but for particular persons who work in the lab, a watch of Milgauss or Ingenieur seems to be necessary. In our market, I have not seen the release of new IWC replica watches for a long time, the last replica IWC watch coming from our market is the pilot Black Aces from M+ Factory. For IWC Ingenieur, I have not seen its super clones for years, it seems like few factories are making the replicas of IWC Ingenieur.

Today, I want to introduce a new replica IWC Ingenieur watch made by GH factory, it is the first time for me and you to hear this factory, in the last two months, I have heard of several new factories names in this field, such as S+, VVS, Ted and Gold, they are new entrants and want to making some money, among them, perhaps Gold Factory will survive in the competition. How about GH? It is a new name to me, but I am not sure if they are a new factory in this field or having made replicas in the past, you know, some factories that make watch parts have been in the market for years, now they also started to make replica watches.

How about the quality of this Ingenieur replica watch? It is not a super clone, but a good quality watch. The price is not cheap. But if ZF makes this watch in future, I think the price will be much higher than this one. I still remembered that this watch has already been in our market in the past, it was equipped with an original Swiss movement, SW200? I think so. It was called “原单”, the price is much more expensive than this one because GH uses a Miyota 9015 movement in this replica.

This Ingenieur replica from GH has five dial color options, there are gray, blue, green, white and black. It looks like one of the VC Overseas made by ZF before. A very good stainless steel replica watch with steel bracelet. If ZF makes this Ingenieur watch in future, I hope they can make a better clasp, because the VC Overseas 4500 made by ZF has an easily broken clasp.

Tags GH Factory, Ingenieur, IWC, Miyota 9015

IWC

M+ Factory Replica IWC Pilot IW326905 Black Aces

Post author By Karren
Post date September 8, 2023
1 Comment on M+ Factory Replica IWC Pilot IW326905 Black Aces

This is not a new model, it was published by M+ Factory months ago, I did not give an introduction of the watch because I really thought it is like a toy. Many people in China have bought this watch and I just knew the real meaning of the black aces a few minutes ago, so I decided to give a short review of the replica.

First, it is about M+ Factory, also called M+F. They mainly produced IWC replica watches, many models that are not made by ZF or V7 can be found from this factory. About the quality, it is accepted by most people, and compared with ZF, it also has price advantage. There are not too many news about M+F, I know they are very active to copy when there is a new model published by IWC.

The replica is made with black ceramic that has a matte finish, the case is measured to be 41mm in diameter and 12mm in thickness. It is said the crown and case back are Titanium made, there is a big airplane on the solid case back. The ceramic case is highly scratch-resistant but afraid of being collided with the hard objects.

The dial is the main selling point of the replica, the lume is fully applied on the white dial, so in the dark conditions, you will see the whole dial has a strong green lume light. The black aces logo at 6 o’clock is the spirit of the watch, it has a special meaning I think, stands for the ACE pilots, and the watch is absolutely a special edition, just made for the ACE. Get a closer look at those hour markers, they are finished very well, especially the triangle hour marker at 12 o’clock, which is three dimensional, on other hour markers, the black coating is evenly applied.

The band is nylon outside and leather on the side that contacts your skin. It uses quick removal system, so very easy for the wearer to change the band. The factory also offers one extra pair of black rubber straps. The replica watch is driven by a Miyota 9039 movement, which is very stable, some people complain the big noise of Miyota movements such as the 9015 in Nautilus, actually I did not hear big noise coming from this Miyota 9039, perhaps M+ Factory made the noise reduction processing on the movement before shipping out.

Tags Black Aces, Ceramic, IW326905, IWC, M+ Factory, Miyota 9039, Nylon, Pilot

IWC

M+ Factory Replica IWC Spitfire IW329701 Titanium Watch

Post author By Karren
Post date May 27, 2023
No Comments on M+ Factory Replica IWC Spitfire IW329701 Titanium Watch

It has been a long time not to see new replica watches from IWC, there were all about Submariner, Datejust, Daytona and Audemars Piguet in the past several months, I liked IWC very much before and considered it is my dream watch that I must get one Portuguese Chrono watch in my life. Today, I still want to get one but not enough money still, and I do not think IWC is beautiful now even Portuguese Chrono is one of the best-looking watch to match your business suit. In recent months, I have seen a lot of homage watches made in China and in other countries, they are so nice and have good quality, many people are buying them, so I think building my watch collection is not an easy job, facing too many options, and there are a lot of good quality homage watches sold at cheap prices, in order not to waste your money, you need to do a lot of search on the internet and watch forums. Back to our topic today, the Spitfire, it is the latest replica IWC watch in our market, made by M+ Factory, this is not a very famous factory, they only made some IWC Mark series replica watches, the quality is good, not sure why they do not make other IWC models, and few people chose IWC watches from M+, unless they can not find the wanted models from other manufacturers like ZF and V7F.

The new IWC Spitfire replica watch is made with solid Titanium material, the case is 43mm in diameter and is measured to be 14.4mm in thickness. The Titanium case has a sand-finish that feels extremely good, the fine sand finish is on the case, bezel, lugs and crown, the case back is solid with an airplane on the center, the big crown has a delicate IWC logo relief on the sunken center. The case is completely built to have the same shape as real IWC Big Pilot, it is a little thick because of the movement inside, which is cloned to genuine IWC Calibre but modified on the basis of a Chinese movement. The best movement used in IWC Big Pilot replica watches is from ZF, and if you need replica IWC watch with real Swiss movement, I suggest you buy a replica IWC Mark series watch from V7, which can be equipped with a real Swiss ETA. I am sure ZF will make this replica watch if M+ sells it well, but do not know when. The blue dial is under a sapphire crystal that features anti-reflective coating, which helps you to read the dial more clearly under the sun light.

The dial is black, does it look like blue, right? Actually it is black. Lume material that looks a bit yellowish is applied on hour markers, hour hand and minute hand. Those numeral minute markers in white do not being applied with lume material, some homage watches of IWC Big Pilot made in China use the lume on all elements of the dial, the lume light too strong. The hour markers inside the circle have a light color, not that shiny white on the minute markers, with so many digital numbers, the dial readability still not affected. The band is replicated according to the band of genuine, but if you do not like this type of band, you can ask your dealer to change the band, there are stores in the market that can customize leather bands, won’t cost too much.

M+ Factory Replica IWC Spitfire IW329701

Replica IWC Spitfire IW329701 Brown Leather Band

Tags IW329701, IWC, M+ Factory, Spitfire, Titanium

Recent Posts

Recent Comments

Archives

Categories