Month: February 2026

PP Factory Replica Patek Philippe Celestial 6102

Post author By Karren
Post date February 27, 2026
No Comments on PP Factory Replica Patek Philippe Celestial 6102

This is a new watch published by PP Factory before Chinese New Year holiday. Will someone consider to buy it? After all this wtch has a very high aesthetic appeal. It is a automatic watch with an indescribable beauty. Genuine watch is sold at a sky high price, but PP Factory sells the replica at a very reasonable price. If you have the genuine watch, buying a replica to wear as a daily watch is a good idea. At a distance, it is hard for people to tell this is a fake watch. However, the genuine watch is made with platinum, so there will be weight difference. And in functions, the replica is slightly different from the genuine.

First, the replica Patek Philippe 6102 is equipped with a clone 240 movement, which is called super clone 240 and also used in replica Patek Philippe 5712. This movement has been upgraded and the engravings on the plate are much deeper than before, but on the genuine Patek 240 Calibre, the micro rotor is 22K gold made, it has a higher winding efficiency, the replica only has gold plating on the micro rotor. On the genuine, the movement plates have very good polishing on the edge and corner, the entire movement has a brighter polishing than the the replica.

Second, the functions. Let me explain the usage of the crowns and buttons on the case. Pull out the crown at 2 o’clock and rotate it to adjust the time, it can be used to wind the watch at the same time in its original position. The crown at 4 o’clock is used to adjust the sky module. The button at 9 o’clock is for adjustment of date and moon phase. All functions on the replica work but they work slightly different from the genuine watch. The central long hand with a moon-shaped tip in red is pointing at current date. I know one factory made this watch before, it seems like the YL factory, but the longest hand with a moon-shaped tip in red works as a small second hand on YL version, this is a wrong feature.

The starry sky dial of the replica definitely won’t give you the stunning visual effect that the genuine one would, the blue dial on the genuine also has a gradient effect, when observed at a certain angle, the dial looks black, while on the replica, the black effect is not too obvious.

Patek Philippe Celestial 6102 240 Movement

Patek Philippe Celestial 6102 Blue Leather

Tags 240, 6102, Celestial, Patek Philippe, PP Factory

Richard Mille

Umi RM67-02 Replica

I do not know why this Richard Mille watch becomes so popular, it is like a toy watch. And before this version from Umi, a lot of men even were willing to pay thousands of dollars to get one from a private studio, I do not even think it is more like a watch than my G-Shock. You can see the weight, it is about 40 grams, will you accept a mechanical watch with such a weight.

Richard Mille has been one of the most popular replica watches in recent years, it is also the watch that got the most improvements, several factories are competing on Richard Mille, however, we can not forget, what truly drove the progress of this watch forward at the beginning were the modification studios. Factories like ZF, New, APS and Umi also made their contributions, they mass-produced these Richard Mille replica watches and drove the prices down.

Umi is a new name in the field of replica watches, but if mention ZF, you guys will know, yes, Umi is a branch of ZF. ZF makes a lot of replicas watches, but currently Umi only produces high-end Richard Mille replica watches. The RM055 and RM35-02 from them have the movements with free-sprung balance, while on this white RM67-02, they also have made some improvements.

This watch is made with white carbon, the screws on the case and crown are made with titanium, the carbon pattern can be seen on the case, but it is not that obvious like on the black carbon case. Measure the watch from left to right, not including the crown, the case is 37.8mm, measure it from top to bottom, the watch is 47.2mm, the case is measured to be 9.2mm thick. There is still a thickness difference if compare with the genuine watch.

The watch comes with a clone CRMA7 automatic movement, its movement frames are made with titanium, it absolutely could not be made to be exactly the same as the genuine RM calibre, but the gears at 7 o’clock can run, this is an upgrade Umi has done. In our market, only two versions of this Richard Mille have the running gears at 7 o’clock, one is made by Umi, the other is custom made by a private studio. Both have a big price difference, for details finishes, the custom-made version is better.

The watch has an elastic band, while Umi also offers one pair of Velcro straps. Besides this white, other colors available in this RM.

Tags Richard Mille, RM67-02, Umi

Rolex

Rolex Rainbow Daytona Replica

Post author By Karren
Post date February 13, 2026
No Comments on Rolex Rainbow Daytona Replica

I never thought this watch would be so popular, even a lot of men have asked me where to get the best one. This replica Rolex watch was made by several watch factories in the market, including Noob(please notice, this is not the previous Noob factory), BT and RX. Noob is the earliest factory to make this watch, it has the same quality as that of BT, today, the one I show with pictures below is made by RX. What is the difference of the watch between these watch makers and RX? RX Factory makes this watch with a similar weight to the genuine, look at the picture below, it is about 210 grams, besides, the crystals on the hour markers and bezel are Moissanite Gemstone.

It is not easy to make your decision on which factory to buy from, because the most important part, also the engine of the watch, is the same super clone 4130 from these watch makers, but if you do care the weight of the watch, there are two options, buying from RX, or customizing one. RX uses a super clone 4130 in this watch, the movement will not easily broke, it is one of the most stable movements used in replicas, but be sure to ask your dealer to check the watch carefully, and better wear the watch for two or three days before shipping to you, this is the best way to guarantee the watch won’t have issues in a short period after receiving.

The Moissanite Gemstone is a big selling point on this replica Rolex. Most replica watches you see online are not using this, only the most high-end replica watches use this Moissanite Gemstone. It is very close to real diamonds, and scratch resistant, even after being worn for a long time, the facets of moissanite remain sharp and bright. The common crystals on most replica watches can not achieve such effect.

Is it possible to get a better one in the market? Yes, a lot of customers buy the Rolex replicas made with solid gold, they are available, but never think you can get one at only $1500 or $2000, a replica Rolex with real solid gold is much more than that, the market for the gold replica Rolex watches is full of pitfalls, so I usually suggest you do not buy a solid golden Rolex replica watch from a stranger. If you do care if the watch has a correct golden tone and will fade in future, the most cost-efficient way to guarantee that you can get a good one is to do a thick gold plating on the surface, that won’t cost you too much.

Replica Rolex Daytona Black Diamond Dial

Tags Daytona, Moissanite, Rainbow, Rolex, RX Factory

Rolex

RC Factory Replica Rolex Daytona 126518LN with Turquoise Dial

Post author By Karren
Post date February 8, 2026
1 Comment on RC Factory Replica Rolex Daytona 126518LN with Turquoise Dial

I have introduced RC Factory and their watches on my blog, this factory does not have a long watch-making history but their watches are really great, they have accumulated a high reputation by producing high quality Day-Date Rolex replica watches with increased weight, which is also the Day-Date Rolex replica watches I highly suggest you buy. I think there will be a certain position for RC Factory in the fild of replica Rolex watches from now on as long as they continue to improve the quality of their watches. Before, RC Factory made Day-Date and Submariner, today, I will introduce another replica Rolex watch from them, it is one of the hottest replica watch in 2025 – the Rolex Daytona 126518LN with turquoise dial.

This Rolex Daytona watch was after by a lot of people when there were no replicas of it in the market, then some factories produced it out, including THB and BT. Now, almost all big factories have this replica watch now, but each one coming from these factories will have subtle difference, so customers are always confused on which one should they buy. Actually do not worry too much because these replicas are already very good enough because the great progress in watch-making technology, especiall this replica Rolex Daytona with these factories is now equipped with the best super clone movement – DD4131.

This Rolex Daytona replica watch from RC Factory is an increased weight version, whose weight is about 160 grams, I measured, it is 159.3 grams. What is the weight of the genuine watch? Genuine watch is made with 18K yellow gold, there is still a weight difference between the replica and the genuine. About this replica watch, each version from different factories not only has a weight difference, but also has a gold tone difference on the case, on this one from RC Factory, the gold color does not look too yellow, the watch from BT Factory also has a similar golden tone, I think this Daytona from both RC and BT is a better choice than the one from other watch makers.

On this Turquoise Daytona from RC, you can also add a layer of real 18K yellow gold coating on the case, the cost to do this is not cheap, which depends on the live golden price. The dial color is also a very hard point to clone, but if you do not have a genuine watch and compare it side by side, it is very difficult for you to see the dial color difference on this replica watch.

Tags 4131, Day-Date, Daytona, RC Factory, Rolex, Turquoise

Recent Posts

Recent Comments

Archives

Categories