Author: Karren

Rolex

Oyster Perpetual 36mm 126000 Pistachio VS vs KRF

Post author By Karren
Post date September 12, 2025
No Comments on Oyster Perpetual 36mm 126000 Pistachio VS vs KRF

Do not wait now, Clean Factory will not be back, there are no news about them in the market, this factory has been closed forever. In my opinion, Clean made the best replicas Rolex watches in the past, like many people thought Noob made the best ones before, but Clean has brought the quality of replica Rolex into another level, which is much better than that of Noob, it is a great loss for all of us. Currently in the market, VS should be the best alternative of Clean, but I still think the Rolex from VS is not as good as Clean in some details, especially the finish of the hands and markers. Will there be another factory can make super clone Rolex that has the same quality as Clean? I think we will wait for a long time.

When there be a new model published by Rolex, every one is waiting for a super clone from Clean, but now you start paying attention to other factories like VS, KR, AR, QF. Today, I will make a brief comparison on the replica Oyster Perpetual 126000 between VS and KR. This replica Rolex watch with a Pistachio dial is very popular.

KR Factory is the first manufacturer to publish the replica of 2025 Rolex Oyster Perpetual, I gave a review here in May https://www.wristwatchspot.com/2025/05/23/kr-factory-2025-replica-rolex-oyster-perpetual-126000/. They offer three movement options for the replica, now VS Factory just published the new 126000, but I still think KR is the best option.

Besides the movement, there is another big difference between the two watches, which is the dial color. Look at the two pictures below, the left one is from VS, the right watch is from KR. The dial of the VS looks nice, but the watch from KR has a more correct dial color that looks slightly darker. However, if you observe the dial very closely, you will find VS has a fine gritty texture, while the dial of KR is smooth, in this aspect, VS is closer to the genuine.

Oyster Perpetual VS vs KR — The right watch from KRF has a dial color that is closer to genuine.

There is no need to compare the other details, VS uses a super clone 3230 movement, pull out the crown to wind the watch, pull it to the first click to adjust time directly, there is no date module in this movement, just like the genuine Rolex movement.

On both watches, the crystal is slightly higher above the bezel, but the edge of the crystal lacks rounded and smooth polishing, not like the Rolex from Clean, every piece has very good rounded polishing on the crystal.

Tags 126000, KR Factory, Oyster Perpetual, Pistachio, VS Factory

Audemars Piguet

APS Factory Replica Audemars Piguet 26331

Post author By Karren
Post date September 5, 2025
No Comments on APS Factory Replica Audemars Piguet 26331

Audemars Piguet 26331 has been very hot for many years in this industry, before APS, two factories have made its replica, they are OM and APW, OM makes this watch good but its function has been sacrificed, the minute-chrono counter at 3 and hour-chrono counter at 9 on the replica 26331 from OM do not work, but the finish on other details is very good. About APW, they do not make too many watches, the 26331 is their iconic product, but I am not satisfied with the quality, even APW has published the latest V2 edition, but I still think their quality is not as good as the one from OM. Then how about the 26331 from APS? I think it has caught the attention of many people, after all APS Factory is the biggest name in Audemars Piguet field, their fans expect a great quality 26331, but how is the watch, really?

My opinion is, if you really like the Audemars Piguet Chrono replica watch, just buy the AP 26240 from APS, this 26331 is not as good as the 26240 from them.

When promoting this watch, APS said that they have improved the movement, which is actually a SL4801, they also said the movement stability has greatly improved and will not have any issues, this is interesting, because a friend of mine got one and the movement now has issue, he can not adjust the date by rotating the crown. So I think APS just uses the same movement as the 26331 from APW, everyone knows that this movement modified by APW has a high return rate. But if you are lucky, you will get a good one with no issues in future wearing. But I would rather believe that the one with 7750 movement made by OM Factory has a higher stability. It is not the right time to buy this replica watch from APS Factory, trust me, a better one will come out soon.

Replica Audemars Piguet 26331 Panda White

Audemars Piguet Royal Oak 26331 Blue Replica

Tags 26331, APS Factory, APW Factory, Audemars Piguet, OM Factory

Audemars Piguet

APS Factory V2 Replica Audemars Piguet 26240 with Free-Sprung Balance

Post author By Karren
Post date August 29, 2025
No Comments on APS Factory V2 Replica Audemars Piguet 26240 with Free-Sprung Balance

APS Factory published the Audemars Piguet 26240 on February of 2025, it is a replica watch with real flyback chrono function, I introduced this watch on my blog at https://www.wristwatchspot.com/2025/02/21/aps-factory-replica-audemars-piguet-flyback-chrono-26240/, when just came out, they got so many orders that the factory could not keep up, customers usually have to wait for around a month for the watch, but it’s fine now. The AP 26240 has become a best seller in the market, APS Factory just carried out a big improvement on the movement, which has been updated to be with a free-sprung balance.

The movement does not change, it is still the same SH4401 as previous one, the only change is the stem was removed and weights were added on the balance wheel. Before, to get a SH4401 with free-sprung balance, some people paid a lot of money to modify the movement in mod workshop, the modification cost was absolutely very high, now APS makes the movement out, APS also increases the price of the watch, but not too high. If you want to experience the latest V2 26240 from APS, need to place your order from the factory, then will not wait for too long.

This is a big step forward for APS, which has made a great contribution in this industry, for people who want to buy the best Audemars Piguet replicas, now I will suggest you buy from APS Factory, whether they consider to buy the regular Royal Oak 15400 or 15500, or the Royal Oak Chronograph 26240, APS Factory is the best choice. By the way, this factory just published the Audemars Piguet Royal Oak 26331, which is also a very good-looking watch that has been sought after by a lot of people for many years. Between 26240 and 26331, which watch do you like? I like 26331 more, but for the replica watch, AP 26240 replica has a more stable movement.

APS almost dominates the market of the replica Audemars Piguet watches, if they can develop a super clone 3126 movement for the Royal Oak Offshore Chronograph Secs@12, then no one will be able to compete with them.

Replica Audemars Piguet 26240 Ceramic Black

Replica Audemars Piguet 26240 Free-sprung balance

Audemars Piguet 26240 Ceramic Black Dial

Audemars Piguet 26240 Ceramic Black Crown

Audemars Piguet 26240 Ceramic Black Case

Audemars Piguet 26240 Ceramic Black Movement

Audemars Piguet 26240 Ceramic Black Clasp

Tags 26240, APS Factory, Audemars Piguet, Ceramic, Free Sprung, V2

Patek Philippe

Nautilus 5711 BBF vs 3KF

Many people here wanted to buy the best Patek Philippe replica watches, they asked me which Patek Philippe watch has a super clone, I always recommend Nautilus 5711, this replica watch has been in the market for many years, it indeed has a high quality, many factories are competing against each other in replica Nautilus 5711, about four or five years ago, one factory named 3K published the replica Nautilus 5711 with a super clone 324 movement in the market, which brought the development of replica Patek Philippe watches into a new era. During the past four or five years, PPF and 3KF have always been competing in the replica Patek Nautilus 5711 watches, but it seems like 3K Factory won this battle, because they have the super clone 324 movement, while the movement used in PPF Nautilus 5711 is a Japanese Miyota movement that has similar decoration to genuine 324 calibre. However, in August, in the field of replica Nautilus 5711, two new factories appeared, one if BBF, the other DDF. Actually BBF is not new to us, they made Hublot Big Bang Unico replicas before. These two factories now got the super clone 324 movement, how did they get this movement, it was only authorized to be used by 3KF before, I think many people are curious about this. Because the exclusive movement licensing agreement between the movement factory and 3KF has just ended, so more factories are able to use this movement in future.

Now, it is time to know the difference of the Nautilus 5711 between BBF and 3KF. The main difference lies in the dial. BBF claims that they have a cooperation with SW Factory, they directly use the SW Dial on their Nautilus 5711. You know, many people bought the Nautilus 5711 before and to pursue perfection, they usually replaced the dial with the SW dial, this cost them a lot of money, the SW dial is not cheap. Now BBF directly uses the SW Dial on their watch, this reduces the cost of secondary modifications on the replica watch. Look at the pictures below, the left watch is from BBF, the right watch is made by 3KF.

First, we notice that the color on the BBF Nautilus is darker, the dial color of the 3KF Nautilus looks slightly grey. The dial color of BBF is closer to that of genuine watch.

Second, the printings of “PATEK PHILIPPE” and “GENEVE” are thicker than that on 3KF dial.

Third, the date font, the black date font on BBF is thicker than that of 3KF. Actually the genuine watch also has a slightly thicker date font like BBF.

Fourth, on 3KF, the edge and corner of the hour markers are sharp, while on BBF, the corner of the hour markers has round polishing.

Fifth, the movement is same, but the engravings on the movement plates and auto rotor are deeper on BBF.

I will take more pictures of BBF Nautilus and do better comparison in future.

Tags 324, 3KF, 5711, BBF, Nautilus

Rolex

VS Factory Replica Rolex GMT-Master II 126710 Bruce Wayne

Post author By Karren
Post date August 15, 2025
No Comments on VS Factory Replica Rolex GMT-Master II 126710 Bruce Wayne

Before VS, Clean already made this replica Rolex GMT-Master II before, now Clean is closed, many people are asking me if this factory will come back, I am afraid that they will not, it is very hard. And this is a lost for our watch fans, because I always think that Clean makes the best replicas of Rolex GMT-Master II, even VS has tried their best efforts to make good quality replica Rolex GMT-Master II, but I think in some details they are still not as good as the ones made by Clean. Besides Clean, I want to talk about another factory before our today’s topic, it is ZF. There is a rumor in the market that ZF was closed years ago, now today the watches such as AP 15400, 15500 and others are not from the real ZF, if this is true, would you still buy watches from ZF? In my opinion, this does not matter, after all these watches still have the same good quality as before.

Today, I will make a brief review on the replica Rolex GMT-Master II watch with black and grey ceramic bezel, it is the latest model released by VS Factory. The watch comes with a jubilee bracelet, VS will launch the one with Oyster bracelet soon.

Bezel

The black and grey ceramic bezel insert is the same as that on previous Clean, they use the bezel coming from the same watch parts manufacturer. The shift between black and gray appears smooth.

The platinum coating on the bezel markers features a frosted finish, which is the same as the genuine.

Dial

First, it is the green GMT hand, it looks brighter on the replica, while the hand on the genuine watch is dark green.

Seeing from the side, the hour hand and minute hand look flatter than that of the Clean factory, both hands are lack of the rounded polishing.

There is a layer of blue coating on the date magnifier, it does not look obvious, but you will find blue hue at a certain angle.

Bezel

The bezel rotates with a tight, precise feel – not loose at all. Each click has a very defined/positive engagement.

Bracelet

The bracelet has a very good finish, which is polishing on the center links and brushing on the links at both sides. The brushing lines on the links are very obvious but also very refined.

The engravings on the clasp. “ROLEX” is thinner and shallower than the genuine, the engravings of the other letterings are also shallower.

Movement

It is DD3285, the same super clone 3285 movement as the one used by Clean before. The movement is very stable, like DD4130, it usually has no issues and can be used for many years. Some websites selling this movement as a Swiss movement option, this is not correct, this movement is cloned in China.

Conclusion

This GMT-Master Rolex replica watch from VS is currently the best one in the market. If you want to compare it with the one made by Clean, I must say each has their own advantages. In some details like the hands polishing and the edge polishing of the sapphire crystal, they are better finished by Clean. Unfortunately Clean has been closed.

Tags 126710, 3285, Bruce Wayne, Clean Factory, GMT-Master II, Rolex, VS Factory

Patek Philippe

Aquanaut 5168 Green 3KF vs BBF

Post author By Karren
Post date August 8, 2025
No Comments on Aquanaut 5168 Green 3KF vs BBF

This replica Patek Philippe Aquanaut watch has been in the market for years, in the past, the best one is made by 3K Factory, but this factory seems to be extremely lazy because they almost have done no upgrades on this replica watch, I think this is because no one else can use the super clone 324 movement, 3K has totally controled it in the past several years, so people have no choices, if they wanted to buy the best replica of this Patek Philippe Aquanaut watch with a super clone movement, 3K is the only option. However, just several weeks ago, the exclusive licensing agreement between 3K factory and the movement manufacturer has expired, now many factories can get the super clone PP324 movement if they have enough money, BBF is not the first one, but the Aquanaut 5168 from them is really good, I made a simple comparison between it and the one from 3K.

The left watch is from 3K, the right one is from BBF. Which one do you like? The left one looks too green. The green color on the right watch is closer to genuine watch.

Since its release, 3K factory has never made color upgrade on this replica watch, this is not acceptable, many buyers paid a lot of money to seek dial and rubber band in correct color to change on, now you do not need to waste money to do this now, the Aquanaut from BBF has correct color on the dial and the rubber band.

The date font on BBF Aquanaut is thicker. It is said that the Aquanaut from BBF uses the date wheel made by SW.

The movement in the BBF Aquanaut is a clone PP324, whose engravings on the plates are deeper. The engravings on the PP330 of the 3KF Aquanaut are a bit too shallow.

The weight of the 3KF Aquanaut is about 98.5 grams, while the weight of the BBF Aquanaut is about 100.6 grams.

The dial lume light has no big difference, but it seems like the lume light on the 3K is stronger.

My conclusion:

BBF makes improvements on the dial, rubber band and movement engravings, it is more cost-efficient to buy this watch from BBF.

Tags 324, 3K Factory, 5168, Aquanaut, BB Factory

Omega

VS Factory Replica Omega Planet Ocean Worldtimer Turquoise

Post author By Karren
Post date August 1, 2025
No Comments on VS Factory Replica Omega Planet Ocean Worldtimer Turquoise

Last time, the Omega Aqua Terra 150m Worldtimer published by VS Factory is very popular, this Omega Planet Ocean Worldtimer is the new arrival from them, there are two models, black and this turquoise, absolutely this turquoise watch is more attractive.

After the closure of Clean, VS has become the true leader in the market, other watch makers appear to be much more low-key, now in replica Rolex field, probably VS will dominate the market, this is not good for our watch fans. Many people like the watches made by VS, which indeed produces good quality replica watches of Panerai, Omega and Rolex, but their watches also have shortcomings, so do not idolize them, just like some people did on the watches made by Noob before. Take the Omega Planet Ocean Worldtimer replica watch as an example, it is from VS, but it has flaws.

First, the Omega replica watch is made with ceramic material, let me measure its case diameter and thickness.

Omega Planet Ocean WorldTimer Case Diameter

The case is measured to have a diameter of 45.3mm to 45.5mm, the case thickness is about 17mm, the specification is the same as that of the genuine watch.

The replica has a weight of 151.9 grams, it is heavier than the genuine watch that is only 143 grams.

On the genuine watch, the case is ceramic made, but the crown and clasp use titanium, on the replica, the crown and clasp are probably made with stainless steel and then plated with black pvd, they are not made with titanium.

This is the finish of the bezel insert on the replica watch.

This is the genuine. Obviously the genuine bezel is more grainy. On the replica bezel, the texture looks more like small grids. VS has made a big mistake on the bezel of this watch, so currently I do not suggest you buy this replica watch.

On the dial, there are also small differences if you compare the replica with genuine watch, but not that obvious like on the bezel. The black sculpture on the center that represents the lands looks more tri-dimensional on the genuine.

The movement is a super clone 8938, which has a beating frequency of 28,800 times per hous, while the genuine movement has a frequency of 25,200. The core technology of the clone movement still differs significantly from the genuine Omega Calibre, the factory just added or removed extra modules on the original movement, then made the close decoration, nothing big deal, but the jewels are real and gears can work. A lot of dealers said this movement is a 1:1 clone of the original, that’s not true, however, it indeed represents the most high-end watch-making technology in replica Omega area.

Replica Omega Planet Ocean Worldtimer Turquoise

Replica Omega Planet Ocean Worldtimer Ceramic

Tags 8938, Omega, Planet Ocean, Turquoise, VS Factory, WorldTimer

Rolex

VS Factory Replica Rolex Submariner No Date 124060

Post author By Karren
Post date July 25, 2025
No Comments on VS Factory Replica Rolex Submariner No Date 124060

Before VS, Clean published this replica watch first, unfortunately, because of the raid, it is not able to order any Rolex watch from Clean now. Will they come back? Many guys hope so, but it is very difficult, just like the same thing happened on Noob Factory before, Noob not only made Rolex in the past, Clean only made Rolex replicas, but they made them too good, after seeing the replicas Rolex produced by so many factories, the best ones are still from Clean. So, I think this is the biggest reason to explain why Clean got raided this time, their fakes are too popular.

During the closing period of Clean Factory, if you want to buy the best replica Rolex watches, VS should be your first choice, while for Daytona, BT Factory may have more choices. This is a great opportunity for VS. Just like the same opportunity which Clean Factory seized after the closure of Noob.

Movement

This Submariner 124060 replica watch is equipped with a DD3230 movement. At first, in the Oyster Perpetual models, VS Factory did not use this movement, they directly used DD3235 movement, the DD3230 movement just came out in last year. For the DD3230, it has the same power reserve time as that of DD3235, but the DD3230 does not have the date module. Like genuine watch, you pull out the crown to wind, then pull out the crown to the first clicking position, you can rotate the crown to adjust time. So there is no date position for the movement, just like the genuine Rolex 3230. This also makes the VS DD3230 different from the other clone 3230 movement in the market.

Bezel

It uses a black ceramic bezel insert. Everyone cares about the color of the bezel pearl, in the pictures below I took with my mobile phone, that pearl looks slightly green, but this isn’t how it actually is when you hold the watch in hand to check. Whether the lume coating in the bezel pearl or in the hour markers and hands on the dial, it is exactly in the same color as that on the genuine watch. Every bezel marker has been applied with a layer of platinum coating to prevent from becoming dark or fading.

Dial

The axia of the hands, its top looks slightly different from that on the genuine watch, but you need to check very carefully to find, every factory could not make this part to be the same as the genuine, including Clean, but VS Factory has improved it. The hands do not have burr on the edge, but if you observe with a magnifier, you will find the edge of the hands does not have that rounded polishing like on the genuine watch. On the central second hand, the stainless steel rim around the lume dot looks slightly narrower, not that wider like on the genuine, but when you wear this watch, people around you are hard to notice these tiny differences.

About the other parts of the watch, they all have excellent completion, you just hard to find the flaws, even you open the case back to check the movement, you will be shocked, its appearance and structure are very close to that of the real Rolex 3230. This is the best replica Submariner 124060. If Clean does not come back, then VS will have no competitor.

Tags 124060, 3230, Clean Factory, Rolex, Submariner, VS Factory

Rolex

GMT-Master II Pepsi VS vs Clean

Post author By Karren
Post date July 18, 2025
No Comments on GMT-Master II Pepsi VS vs Clean

Last time, VS Factory published the replica Rolex GMT-Master II Pepsi, this is a big challenge to Clean, first, VS finally got the Dandong 3285 movement, from now on, Clean is not the only factory that uses this super clone movement, second, VS factory claims that their GMT-Master II is the best one and closer to the genuine watch, so today, I will make a picture comparison review on the GMT-Master II Pepsi between Clean and VS, let us see which one is better.

Bezel

The left one is from Clean, the right one is from VS, both are the latest version, the bezel is manufactured by the same watch part factory, it is the latest V3 ceramic bezel. No color difference on the bezel between the two factories. The platinum coating on each bezel marker has noticeable matte finish.

The bezel is bi-directional rotating. It takes me a bit more force to rotate the bezel on VS Pepsi GMT than rotating the bezel on Clean Pepsi GMT, and the bezel rotation on VS Pepsi produces a crisper sound. I think the bezel rotating feel is better on VS.

The ceramic bezel rim on VS Pepsi GMT is thicker.

Bezel teeth comparison. The top one is VS. The bottom one is Clean. It looks like the bezel tooth on VS Pepsi GMT has a smaller opening.

Crystal

This is the crystal on Clean. It stands a bit higher than the crystal on VS Pepsi GMT. The edge of the crystal has a more rounded finish on Clean.

This is the crystal height on VS GMT. On the edge of the crystal, its top has a rounded polishing, while its side has a beveled polishing that looks more obvious than Clean.

Check the edge of the crystal on VS Pepsi GMT, it has a distinct bevel.

Date

On the date magnifier, Clean has a blue AR coating, while VS does not have that.

The black date font seems to have a bigger size on Clean, please check the Clean watch on the right. I think the magnifier on Clean offers a greater magnification.

Hands

I did not take too many pictures to compare their hands, but I can tell you that Clean has a better finish on the hands, their hands are in higher quality. The hands on Clean have a rounded finish on the edge that makes them look more tridimensional, while the hands on VS look more flat. The minute hand tip on VS is more pointed. Please check the pictures below.

This is the tip of the minute hand on VS.

This is the tip of the minute hand on Clean.

The gap between the hour hand and the 9:00 hour marker is different, please check the two pictures I took below.

On Clean, the hour hand is closer to the 9:00 hour marker.

On VS, the gap is bigger.

About the color of the GMT hand, the red color of the GMT hand on VS looks brighter. Look at the picture, the left watch is from VS.

There are also differences on other parts between the two watches, but the differences are not very noticeable. For example, some people said the engravings on the clasp are much deeper on the VS GMT Pepsi, this is wrong, not much deeper, just looks slightly deeper. The finish of the bracelet is also the same.

Have you gotten the GMT-Master II Pepsi from both VS and Clean? If yes, please tell us more differences between them, this will help our watch fans.

Tags Clean Factory, Dandong 3285, GMT-Master II, Pepsi, Rolex, VS Factory

Rolex

VS Factory Weighted Daytona Replicas

Post author By Karren
Post date July 11, 2025
No Comments on VS Factory Weighted Daytona Replicas

Before VS, so many factories have been making replicas of Daytona with increased weight, there are APS, Gold, Q, CBD, some people also say that BT has some several weighted Daytona models, however, I do not recommend any of these watch makers for a Daytona with increased weight. First, for the Daytona from APS and Gold, the movement is SH4130 or SH4131, and the case of the watches has a high probability of peeling off, Q Factory Daytona usually does not have that case issue, but their Daytona also uses the same movement and the factory charges too high prices by just adding extra links to increase the weight. Second, for the new watch maker CBD, their bracelet is too thick and does not have a good finish. These are the reasons to explain that I do not suggest you buy a Daytona with increased weight from those factories mentioned above.

In the market, I think VS Factory makes the best Daytona with increased weight. First, they are using the best clone 4130 movement and DD4131 movement. Second, they have a rich experience in making such type of Rolex, especially the successful experience gained from producing the 42mm YachtMaster years ago, now the weighted Daytona made by them does not have issue of case peeling off. Third, the case and bracelet of their Daytona watches can be repeatedly wrapped with gold. Fourth, their prices are friendly. In the past two years, VS Factory has frequently made major moves in the replica Rolex field, they are the main competitor to Clean and even doing better than the latter. In the following, I share the pictures of the weighted Daytona replica watches from VS Factory.

Here are some popular Daytona models from VS Factory that feature an increased weight.

However, this type of Daytona watche from VS is not perfect, they have two big shortcomings, take the following stainless steel one as an example.

First, the weight of the watch is 184 grams, even having been added with extra weight, but is still 40 grams lighter than the genuine watch. But it is heavier than the Daytona from Clean.

Second, on the dial, the sunburst finish looks slightly shallower than that of the genuine watch, it seems like all Daytona watches from VS Factory have this issue. Clean Daytona watches do not have this issue, I admit that Clean Daytona has better sunburst finish and better hands finish on the dial.

Tags Daytona, Rolex, VS Factory

Recent Posts

Recent Comments

Archives

Categories