Replica Panerai Luminor Submersible PAM 389 Titanium Watch for The Expendables Heroes

Replica Panerai Luminor Submersible PAM 389 Titanium Watch

Have you ever seen The Expendables movie series, Stallone and his brothers were all wearing a robust brand watch on their big hand. And in The Expendables 3, a new big face appeared on their wrist, that is PAM 389 from Panerai, yes, Stallone has been a Panerai watch fan for many years, he wore this big brand in many public places and in the movies, but this time in The Expendables 3, PAM 389 was not only worn by him, it also appeared on the wrist of Dolph Lundgren, Jet Li, Rany Couture, Jason Statham and Terry Crews, each of them is tough guy and PAM 389 is exactly built for them.

PAM 389 Full Close View

PAM 389 Black Bezel

After the movie came to the public, many people loved Panerai and started to accept this large watch. PAM 389 is domineering and exactly fulfill the temperament of tough guys, however, within a low budget, a genuine PAM 389 is too expensive, then they turned to a great alternative, so the factory in our market manufactured the replicas. It is a super replica made with an original watch as sample. These pictures and short review here only give you an overreview of it, you will be shocked by its great quality if holding one on hand by yourself. On the whole, this replica has inherited all advantages of the genuine, here I will explain the details in the following.

Titanium Case Back with Engravings

Black Rubber Strap with OP Logo

The biggest spot on the replica lies in its band, ths black rubber strap perfectly matches the whole watch very well. Black dial is simple and has easy layout design. Small second hand is running on the subdial at 9 o’clock, at 3, there is a small date window. All printings including “LUMINOR SUBMERSIBLE AMAGNETIC” at 12 and “PANERAI AUTOMATIC” at 6 are all in white color, besides, bar-shaped and dot hour markers as well as hands are applied with original SuperLuminova like genuine Panerai. Due to the SuperLuminova, the dial lume is really amaing, the green lume light is as strong and durable as genuine. I do not want to say much about the replica, the pictures here have it all. Finally, let’s see the specifications:

Clone P.9000 Movement Test

Movement: Clone P.9000 with Modified Plates and Antimagnetic Cover
Case: 47mm*18mm, Brushed Titanium, Black Ceramic Bezel
Dial: Black with Superlumed Hour Markers and Hands
Crystal: Sapphire with Colorless Anti-Reflective Coating
Band: High Quality Black Rubber Strap with Pre-V Buckle
Water Resistant: 50 Meters

Ultimate 1:1 Replica Rolex GMT Master II Two Tone Watch with Clone 3187 Movement

Rolex GMT Master II Two Tone Replica

In recent times, I have written a lot about Rolex watches and most of them are vintage Sub and Explorer, they got a great response on my blog, many readers asked how to buy it and encouraged me to written more things about those vintage watches. Yes, I will keep doing my work to introduce more fantastic replica watches, besides, all advice I have given to you is honest, there are a lot types of replica watches in the market, each type varies in quality, I just hope you to get the most high-end ones.

GMT Bezel

Rolex GMT 2 Black Dial

There is one thing I must explain, that is, many people are obsessed with those replicas manufactured by big factories like Noob, BP, J12 and others, but this does not mean that they are the best. Sometimes a cheap quartz watch will run longer than a Noob Submariner at several hundreds of dollars, every one is looking to get the best one, but you just need to find the one that perfectly fits your style.

Rolex Crown Buckle

Rolex Clasp

Here comes the two tone GMT Master 2 replica. Genuine watch was published in 2008 BaselWorld, in that year, Rolex released a lot legendary models. In nowadays market, replica watches are usually improved from two aspects, one is lume, the other is font. This GMT Master II replica not only has an outstanding two tone outlook, its dial lume is also upgraded, the luminescence applied on the hour markers and hands is thick and durable, it is strong green light you can see from the dial in the dark.

Stainless Steel Case Back

To make it look closer to genuine, bezel font is engraved and in a certain depth, then being painted golden tone. The dial has four colors to separate each detail and give a better visibility. Black main dial matches with golden hour markers and hands, the date window features thick black font in white background, the gmt hand could be adjusted through the crown, it has a green stem that echoes with the green words “GMT-MASTER II” on dial, every part of the replica comes along with the golden color, this makes the watch to be in line with its Two Tone style.

Whatever the size, or watch parts, they are all 1:1 replicated according to genuine, all external watch parts could be exchanged with genuine watch except the movement. The replica GMT Master 2 uses a high end Chinese automatic movement, which we usually called it Asian ETA 2836-2, this movement may be manufactured in Tianjin, China, the watch factory in Guangzhou bought the movement and modified it to the outlook of Rolex 3187, then they installed the modified movement in the replica.

The following is a photo of the movement accuracy test in my watch studio:

Rolex Clone 2836-2 Movement Test

A Great Homage Project – Chronotac Seamatic Automatic Watch Review

Chronotac Seamatic Watch

Today, I will not give a replica watch review as usual, this time a new face will appear here, it is a Rolex? No, the watch has a very close appearance to Rolex but it has its own name – Chronotac. This brand originates from China and is completely a homage watch that replicates the appearance of many vintage Rolex Submariners and Explorers, Chronotac has produced many models that have decent quality, most of them are sold under $200 usd. This watch I will introduce to you guys is a Chronotac Seamatic Automatic, which is a homage of vintage Submariner ref.XXX, sorry, I do not know the exact model.

Chronotac Seamatic Watch - Dial Design

Chronotac Seamatic Watch - Sapphire Crystal

The watch is in full stainless steel, the case and bezel inherit the design of Rolex Submariner, the bezel could be rotated and there are printed diving markers on it, a white pearl is set in the bezel but there is no steel guard around the pearl like modern Submariner. The dial is black, it features white printings and minute scales. At 12 o’clock, there is a capital “T” in a circle, this is the logo of brand Chronotac. Under the T mark, there are words “CHRONOTAC SEAMATIC” and “AUTOMATIC”. At 6 o’clock, a big arrow in white is very eye-catching, actually I love these symbols very much on the dial. All hour markers and hands are applied with yellow luminous material.

Chronotac Seamatic Watch - Bezel

It comes to the bracelet on the watch, the stainess steel bracelet is brushed, I must admit that many people prefer a steel band on a watch rather than a leather strap or nylon band, but here on this Chronotac watch, I would like it to be equipped with a nylon strap, whether a black or green one, it will look better than on this steel bracelet. I did not blame this watch, if the supplier have noticed, it is a good idea for him to sell one pair of nylon straps with this watch. Another place which I am not very satisfied with is its crystal, a vintage Submariner usually uses plexi plastic as front crystal, while this Chronotac features a sapphire crystal, this deducts its points in my mind, a vintage watch should look like it should be.

Chronotac Seamatic Watch - Bracelet

Chronotac Seamatic Case Back

All Chronotac watches use high end Chinese Automatic movement, including this one. The movement could offers the watch basic functions of hours, minutes, seconds and date.

New Replica Dietrich OT-1 Green Watch by V6 Factory

Dietrich OT-3 Green Replica

Dietrich is a very young watch brand that was created by famous French designer Emmanuel Dietrich, it is also a Swiss brand. The main work of Dietrich is Organic Time(OT). OT series adopted multi-piece case construction, to show the diversity and richness of nature.

Dietrich OT-3 Green Hands

OT-1

I went to market and found the replica of Dietrich watch this afternoon, my watch supplier told me that V6 has released the latest collection of replica Dietrich watches, so I borrowed one and took some photos here. It is a very special watch,the front case is brushed stainless steel with four black pvd screws fixed. The case shape has unique lines that look like the cobra head. Look at the case back, its design is different from other watches, it allow the wearer to remove the straps easily and install a new one, very convenient, so people who like this watch could also DIY watch bands that mostly fit it.

Dietrich OT-1 Caseback

The dial is multi tired, green hour and minute hands are very eye-catching, the dial design makes Dietrich position it as a fashion young watch brand. On the center of the dial, you can clearly see the movement parts. All hands and hour markers are applied with superlume material. The color of hour markers just exactly matches with the green stitching on watch band. The caseback is solid stainless steel engraved with “DIETRICH”, “ORGANIC TIME” and water resistance information, open the back, you will find a high end automatic movement lying inside, it is Miyota 82S7 directly imported from Japan, so it will be very accurate, especially its stability, will be much better than other replicas with Chinese automatic movement.

Dietrich Movement Test

Here I list the specification of the watch:

Movement: Japan 82S7 Automatic, 21 Jewels, 21600VPH
Case: 48mm*46mm*14mm, 316 Stainless Steel
Crystal: Sapphire with AR Coating
Dial: Muti-Tire
Band: Calf Leather Strap with Tang Buckle
Water Resistant: Yes

New Replica IWC Mark XVIII Watch by V6 Factory Arrived

IWC Mark XVIII Replica

This time V6 factory published the IWC Mark XVIII replica watch ahead of MK factory, but people who bought IWC replicas can not deny that the best Mark XVI and XVII are all made by MK factory. V6 released two pieces of replica IWC Mark XVIII watches, one is with white dial, the other is black. Here I will give a short review on the white dial version.

First, the case is in 41mm and brushed in whole appearance, the Mark series is famous for its simple design and practicability as well as highly readable dial. Mark XVIII is the latest release of IWC in 2016, now it really surprises me when there is already an imitation version in replica watch market. The ability of cloning new arrival brand watches is really amazing. Many people especially my Australian clients love simple watches and this new IWC model exactly meet their needs.

IWC Mark XVIII White Dial

Second, the dial is attractive to me because I really love the simple dial design watch with leather strap. It is in white color with black printings, hour and minute hands are IWC Mark series style, there are black hour markers also, the date window at 3 features thin date font in white background. The dial could offer wearer a great readability not only because of the details in highly contrast, there are also white luminescence applied on the hour markers of 3, 6, 9 and triangle at 12, these things glow strong green light in the dark.

IWC Mark XVIII Caseback

IWC Dial Lume

Like Mark XVI and XVII manufactured by MK factory, which makes the best IWC Portofino and Mark series replicas in our market, the Mark 18 replica is also equipped with an Asian clone 2892 movement, the movement plates and rotor are all decorated to the outlook of genuine ETA 2892, this is the replica Mark watch in highest grade AAA+. The following lists its specifications:

Movement: Clone ETA 2892 Automatic, 21 Jeweled, 28800VPH, Nickel Plated Movement Plates
Case: 41mm*11mm, 316 Stainless Steel, Brushed, Solid Steel Caseback with Engravings
Dial: White, Black Numeral Hour Markers
Crystal: Sapphire
Band: Black Leather Strap with Brushed Stainless Steel Buckle
Water Resistant: Yes